To
order a free catalog | Click
here |
To buy AMSOIL
products, visit the AMSOIL
Online Store
|
Buy AMSOIL at wholesale prices |
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
|
|
AMSOIL 10W-40 High Performance
Synthetic Motor Oil
AMSOIL High Performance
Synthetic 10W-40 Motor Oil provides superior protection
and performance in the most severe automotive driving
conditions. AMSOIL High Performance Synthetic 10W-40
Motor Oil provides a wide range of protection in all
four-cycle gasoline and diesel engines, including pickups,
RVs, cars and off-highway vehicles. It is recommended
for use in vehicles subject to stop-and-go driving,
short trips, high temperatures, frequent trailer pulling
and off-road use.
AMSOIL High Performance
Synthetic 10W-40 Motor Oil is designed to provide maximum
benefits in gasoline and diesel engines. Product
Code: AMO
|
The 25,000 mile oil and filter
was a life saver. We saved more time and effort not
changing the oil every 3,000. We normally put 35,000
miles per year (3,000/month) on our transporter. We
normally had to change the oil once a month, which to
a do-it-yourselfer can be a Saturday morning every month
spent crawling under the transporter getting greasy.
With the 25,000 mile oil and filter combination we only
have to spend two Saturday mornings per year slaving
away under the transporter. How's that for saving time
and money? Ten Saturday mornings I can find something
better to do.
Canaan M. Manley
Owner of Backdraft Motorsports |
Resists High Temperature Vaporization
Conventional motor oils tend to "boil
off" in high temperatures, losing up to 25 percent of
their original weight. These vaporized oils circulate poorly,
reduce fuel efficiency and contribute to excessive emissions
and engine wear. AMSOIL High Performance Synthetic 10W-40
Motor Oil resists vaporization. In fact, according to the
NOACK Volatility Test, which measures the weight loss of an
oil due to evaporation, AMSOIL High Performance 10W-40 only
loses 7.0 percent of its weight in high temperature service,
surpassing rigorous European standards set at 13 percent weight
loss in high temperature testing. The superior vaporization
resistance of AMSOIL High Performance 10W-40 keeps engine
wear, oil consumption and emissions to a minimum, while keeping
oil circulation efficient and fuel economy high.
Resists Oxidation and Thermal
Breakdown
Conventional oils oxidize in high operating
temperatures, producing sludge and deposit build-up that contribute
to corrosion, increased engine wear and decreased fuel economy.
AMSOIL High Performance Synthetic 10W-40 Motor Oil resists
oil breakdown, maintaining its cooling and lubricating properties
and providing extended drain intervals. It continues to provide
maximum protection at temperatures that oxidize conventional
oils. The advanced heat transfer capabilities and high lubricity
of AMSOIL High Performance Synthetic 10W-40 Motor Oil keep
engines running in their optimum temperature range for top
performance and long life.
Provides High Shear Stability
AMSOIL High Performance Synthetic 10W-40
Motor Oil surpasses the North American SAE and European ACEA
oil specifications for high temperature/high shear (HTHS)
viscosity. It retains its viscosity at temperatures and loads
that cause conventional oils to shear back to a lower viscosity.
AMSOIL High Performance Synthetic 10W-40 Motor Oil maintains
an extremely protective viscosity of 3.93 cP at 302°F
(150°C) in the ASTM D 4683 High Temperature/High Shear
Test, significantly exceeding test limits.
Provides Low Temperature Protection
AMSOIL High Performance Synthetic 10W-40
Motor Oil remains fluid at temperatures as low as -54°F
(-48°C), permitting easy engine cranking for quick starts.
During sub-zero temperatures, it flows to all parts of the
engine much quicker than conventional petroleum oils, greatly
reducing the rate of wear and increasing engine life.
Resists Deposit Formation
AMSOIL High Performance Synthetic 10W-40
Motor Oil is highly resistant to oxidation, running significantly
cleaner than conventional motor oils. AMSOIL 10W-40 has a
superior detergent/dispersant additive package that, when
tested after tens of thousands of miles of use in the crankcase,
still exhibits outstanding deposit control.
Inhibits Rust and Corrosion
AMSOIL High Performance Synthetic 10W-40
Motor Oil contains special rust and corrosion inhibitors to
protect iron parts, as well as copper, lead and aluminum bearing
materials.
Provides Extended Drain Intervals
AMSOIL High Performance Synthetic 10W-40
Motor Oil features a superior synthetic composition and advanced
performance additives, performing much longer than competing
conventional and synthetic oils. No other major oil manufacturer
matches AMSOIL's 25,000-mile or one-year drain interval recommendations.
Mixing AMSOIL
AMSOIL High Performance Synthetic 10W-40
Motor Oil is compatible with conventional petroleum oils;
however, mixing AMSOIL 10W-40 with a conventional oil will
shorten the drain period of AMSOIL 10W-40. Engine oil additives
or after-market products are not recommended for use with
AMSOIL 10W-40.
Which
AMSOIL Products Are Recommended For Your Car or Truck?
| Click
Here And Enter Your Vehicle Information To Find Out
|
Click
It, Print It, and Mail It
|
Printable Dealer Application |
Mail
your completed dealer application to:
AMSOIL Inc, AMSOIL Building, Superior, WI 54880.
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
I welcome the opportunity to work with you
personally as your servicing AMSOIL Dealer. Use the information
on this website to contact me. You may also check out the
AMSOIL
Corporate Website for product and business opportunity
information.
If you would
like more information about AMSOIL INC., click one of the
links below:
|
